Varukorg
Din varukorg är tom, men det behöver den inte vara.
NYHET!
Denna digitala pool-testare från Hanna Instruments ger hög noggrannhet och mäter pH, ORP och temperatur i ett robust, vattentätt hölje som flyter. Ersätter dina vanliga teststickor och ger exakta värden.
- Mäter:
pH
ORP
Temperatur
Den perfekta lösningen för professionell vattenanalys av pooler och spa. Möjliggör snabb provtagning genom att helt enkelt doppa enheten i vattnet, utan att behöva tillsätta tabletter eller vätskor - enklare (och mer exakt) än såhär blir det inte!
Dessa kalibreringsvätskor ingår: pH 4, x 2, pH 7 x 2, ORP x 2 inklusive vinterförvaringsvätska/storage sulution + ph electrode cleaning-vätska
Manual: HÄR
Från leverantörens hemsida:
A compact pH, ORP and temperature tester, part of Hanna Instruments pool-line family, it features a two-button operation system and is easy to use.
The housing of the tester has been completely sealed against humidity and designed to float in case it is dropped into the pool, hot tub or spa.
This meter features the HI-73127 replaceable pH electrode with a stainless steel round connector. This cartridge design has no pins which could bend or break.
Features
- Automatic one or two-point pH calibration
- Waterproof – designed to float if accidentally dropped in water
- Automatic Temperature Compensation – All readings are compensated for variations in temperature and temperature is displayed along with the ORP reading.
- Hold button – Freezes reading on the display to allow recording of measurement
- Battery % level at start up
Specifikationer:
| pH Range | -2.00 to 16.00 pH | |
| pH Resolution | 0.01 | |
| pH Accuracy | ±0.05pH | |
| ORP Range | ±1000mV | |
| ORP Resolution | 1 mV | |
| ORP Accuracy | ±2 mV | |
| Temperature Range | -5.0 to 60.0°C | |
| Temp Resolution | 0.1°C | |
| Temp Accuracy | ±0.5°C | |
| Additional specifications | ||
| pH Calibration | Automatic, one or two-point with two sets of standard buffers | |
| ORP Calibration | Factory calibrated | |
| Battery life & type | 1.5V (4) approx. 250 hours of continuous use; auto off after 8 minutes of non-use | |
| Environment | -5 to 50°C; RH max 100% | |
| Dimensions | 163 x 40 x 26mm | |
| Weight | 100 g | |
| Ordering information | Supplied with HI-73127 pH electrode, electrode removal tool, protective cap, pH buffer solutions 4.01 and 7.01 x 2 each, 470mV ORP test solution sachets x 2, pH electrode cleaning solution sachet, pH storage solution sachet, batteries, and instructions. |
